Product Summary

The Sullair MPB-60A Paving Breaker is designed for general demolition of sidewalks, driveways, foundations, boulders and roads. Designed for minimal air consumption with no additional lubrication requirements, the Sullair MPB-60A has virtually eliminated most high-wear parts from its design, such as the multi-part tappet system, side rods and springs found in conventional breakers. The sleek one-piece housing design with direct impact piston enables the MPB-60A to break through concrete and asphalt with smoother operation.

 

Features + Benefits

·         Delivers up to 1,360 BPM

·         Accepts 1 1/4in. x 6in. bits

·         Variable speed throttle enables improved control of impact

·         Requires 48 CFM at minimum of 90 PSI for maximum power and efficiency

·         Quieter, as piston impacts directly on steel shank instead of tapper, reducing noise and kickback, allowing for less operator fatigue

·         One-piece, non-protrusive housing features a leakproof air cushion that forms at the end of the piston stroke and stops the piston from direct impact when the tool is not in operation

·         Minimal lubrication required

 

Key Specs

Item#	58226
Brand	Sullair
Manufacturer's Warranty	2 year commercial limited
Ship Weight	69.0 lbs
Product Type	Breaker/hammer
Blows Per Minute (BPM)	1,360
Impact Energy (ft. lbs.)	90.85
Impact Energy (J)	125.56
Air Inlet Size (in. NPT)	3/4

 

CFM at Load	48
Piston Bore (in.)	2 5/32
Piston Stroke (in.)	5 5/32
Accepts Bits (in.)	1 1/4 x 6
Chisels Included	No
Overall Length (in.)	26 1/2
Dimensions L x W x H (in.)	26 1/2 x 15 x 5